Thickness and Composition: 18 mm thick, for example, is made of several layers of plates pressed together. This layering technique provides strength and stability to the board.
Weight: The weight of such an 18mm thick multi-layer board is approximately 3.7 kg. The weight of the board can vary depending on factors like the density of the wood used and the manufacturing process.
Length: The length of this type of board is stated as about 44 meters. It’s essential to note that this length seems unusually long for a single board. There might be a misunderstanding or typo in this information, as typical plywood or multi-layer boards are not produced in such extreme lengths.
National Standard: You mentioned that this board adheres to a national standard, which implies that it meets specific quality and safety criteria set by the relevant authority.
Variation: You also mentioned that there can be variations in weight due to differences in board density and manufacturing processes between different manufacturers. This is common in the plywood industry, where product specifications may vary.
If you are looking for more information about this particular type of multilayer board, or if you have questions about its application or availability, you may need to contact a supplier or manufacturer that can provide you with more details. In addition, you may refer to the link on the website (foresmate.com) where you can find more information about this or related products.
Contact us
A Sheet Of Plywood A Sheet Of Plywood A Sheet Of Plywood
Plywood is a three-layer or multi-layer board-like material constructed of wood pieces scraped or sliced into veneer from wooden squares and then attached with adhesive. Odd-numbered veneers are typically used, as are neighbouring layers of veneer. The fibre directions are perpendicular and bonded together. Plywood’s general length and width specifications are 1220x2440mm, and its thickness specifications are 3, 5, 9, 12, 15, 18mm, and other categories.
On the market, plywood is classified into three types: imported boards, joint venture boards, and domestic boards. The most common specifications are 1220x2440mm,additional standards include 1220x1830mm or 5 mm and 915x1830mm. TodayHot parameters for the special package door are 915x2135mm, 1220x2135mm. Other plywood criteria include small-format plywood, which is rarely used in decoration. Multi-layer plywood has 7 or more layers and is mostly utilised in building and automotive manufacturing. When choosing plywood, it is critical to understand the requirements and measurements.
Consumers can calculate the number of materials required based on the area of interior decoration. To avoid unnecessary waste caused by material purchases made haphazardly, five plywood should not be utilised where three plywood could be used.
What Are The Furniture Panels? Which Board Is The Best For Furniture
There are many various types of boards that can be used for furniture in today’s decoration, each with its own set of features. So, do you know what kinds of furniture panels there are? Which type of board is best for furniture?
Here’s a more in-depth look at the many varieties of furniture panels.
Furniture panels, wood board
Wood board
The block board, also known as the big core board, is made of wood. The block board combines the finger joint board and multi-layer board manufacturing processes. The upper and bottom thin solid wood veneers press the solid wood splicing board core through the cold and hot press. It’s created after glueing. The centre splicing board core is spliced by short solid wood slats that have been processed to a specified specification to produce the board with a certain thickness and strength. The upper and lower middle boards of the woodworking board provide sufficient lateral strength and stability. The board’s beauty is improved by the outermost surface plate.
The environmental protection coefficient of higher-quality wood board may be ensured, but the cost is also higher. When combined with other processes, such as later painting, it will make an environmentally favourable product less environmentally friendly. Under typical conditions, the wood-board furniture room should be more aired, and it is best to leave it vacant for a few months before moving in.
Furniture board, particle board
Particle board
Particle board, often known as particle board, is a type of man-made board consisting of wood or other lignocellulosic materials that has been crushed at a specific temperature and pressure using adhesive. There are two types of particle boards: homogeneous particle boards and three-layer particle boards. The three-layer particle board is composed of larger particles in the centre and small particles on either side. Homogenization refers to the particles being the same size. The addition of a specified “moisture-proof factor” or “moisture-proof agent” and other raw materials inside the particle board results in what is commonly referred to as a moisture-proof board.
Particle board is a good material for furniture production in other countries, but because the national standard for particle board is several times lower than the international standard, and there are frequent reports of formaldehyde levels exceeding the standard, people have a negative impression of this type of board. Putting a green dye inside the particle board creates what the market refers to as green-based particle board. Many producers misrepresent it as a green board, but there is no scientific basis for this. In truth, the majority of top-brand particleboards in the United States and overseas are made from natural base materials. Furniture board made with solid wood finger joints
Finger joint board made of solid wood
The top and bottom are not sandwiched in solid wood finger-joined board, also known as integrated board, glulam, and finger-joined timber. Because the saw-toothed interface utilised between the boards is comparable to the cross butting of two hands’ fingers, it is referred to as a finger joint board. Because the finger joint board has few splicing points, the glue employed by Gu Qi is exceedingly small, characterised by good environmental performance, and can essentially attain the environmental protection E0 level.
The finger joint board displays the wood colour as well as the splicing traces of various splicing slats. There are also two types of finger joints: knotted and non-knotted. The knotted ones have scarred eyes, whereas the non-knotted ones do not, which is more attractive. Some installers utilise the fingerboard directly to construct furniture, and the surface is not required to be affixed to the furniture panels. He is fashionable and frugal. The finger-joined board is prone to cracking and distortion. When buying a finger-joined board, make sure the spliced slats are not too thin or too narrow, as this can influence the structural strength of the board. Environmental board, furniture board
Ecological board
Ecological board is a novel new sort of wooden ornamental board in my country. It is based on the manufacturing technique of impregnated adhesive paper veneer wood-based panel. It designed and manufactured furniture panels and blockboard as the substrate and impregnated adhesive film paper as the veneer after years of improvement and innovation. A material kind. After all, the ecological board is new, and there are currently no industry-related norms or specifications. There are two types of ecological boards: narrow sense and broad sense. In a broad sense, ecological board is equal to melamine veneer.
Solid wood multilayer board
The base material of the solid wood multilayer board is multi-layer plywood arranged in a crisscross pattern, and the fabric is high-quality solid wood veneer or technical wood. It is made by a number of procedures, including cold pressing, hot pressing, sanding, and curing. Because the solid wood multilayer board is not easily deformed and has a great performance of good indoor temperature and humidity adjustment, the surface layer of the solid wood veneer material has a natural and real wood texture and feel, which increases selectivity. As a result, it is extremely popular among consumers.
The multilayer solid wood board has outstanding structural integrity and is not easily deformed. The deformation faults of the solid wood board are solved from internal tension due to vertical and horizontal glueing, high temperature, and high pressure. The self-made high-quality environmentally friendly glue is used in the manufacturing process to ensure that the product’s formaldehyde emission limit meets the national standard criteria, and it is green and environmentally friendly.
Solid wood board
Solid wood panels, as the name implies, are wood panels constructed of whole wood. These boards are the finest choice for decoration because they are durable and have natural textures. However, because of the high cost of such furniture panels as well as the high requirements for building technology, they are not widely employed in decoration. There is no universal standard specification for solid wood boards, hence they are normally classed according to their actual name. MDF and particle board.
Density board
Density board, also known as fiberboard, is a type of board constructed of wood fibre or other plant fibre as the raw material and coated with urea-formaldehyde resin or adhesive. It is classified into three types based on its density: high density board, medium density board, and low density board. Because the density board’s wood fibre particles are smaller than those of particle board, more glue is required, and the environmental protection performance is poor. The furniture is made of medium density MDF.
MDF has a level and high surface, fine substance that is easy to grind and etch, and weak moisture resistance. MDF’s nail holding force is lower than that of particle board. Tightening the screws causes them to loosen. It is tough to repair due to the low strength of MDF. Furniture board, fireproof board
Fireproof board
Fireproof board is a decorative board created by autoclave technology from silicon or calcium materials as the major raw materials, blended with a specified amount of fibre materials, lightweight aggregates, adhesives, and chemical additives. It is a new sort of material that is becoming increasingly popular, and its application is not limited to fire protection. Fireproof board construction has greater criteria for pasting glue, and higher grade fireproof board is more expensive than furniture panels. The fireproof board is typically 0.8mm, 1mm, or 1.2mm thick.
Melamine board
Paint-free board is another name for melamine board. The manufacturing procedure involves soaking different colours or textures of paper in melamine resin glue, allowing it to cure, then paving it on the surface of particleboard, medium-density fiberboard, blockboard, or hard fiberboard and heating it. Decorative board that has been pressed. Furniture board, painted board
lacquering board
The baking varnish board is manufactured with density board as the basis material, and the surface is polished, primed, dried, and polished six to nine times at a high temperature. It is mostly utilised for cabinets, doors, and other similar applications. The lacquered board is incredibly fashionable and appealing, with vivid colours, high sheen, a powerful mirror effect, and a great visual impact.
The lacquered board’s surface is spray-painted, and it is extremely sensitive to bumps and scratches. Once broken, it is difficult to repair and must be replaced in its whole. In a kitchen with a lot of oily fumes, the paint board is prone to colour variation and appearing old. Furthermore, the baking varnish board has high processing requirements and a high scrap rate, thus the market price is substantially higher than that of other boards.
At the moment, the environmental protection wind is blowing strongly in the home improvement construction materials industry. Plates, as a major component of house improvement, are also the target of company competitiveness. There are numerous types of environmentally friendly and green plates, so as buyers, we must consider how to choose environmentally friendly panels and what classifications of environmentally friendly panels exist. We just don’t know which environmentally friendly panels are the true environmentally friendly panels because there are so many different sorts on the market.
How to Select Environmentally Friendly Plates
Although purchasing ecologically friendly boards is not difficult, it is also required for both the eyes and the nose.
First, smell the stuff.
The first step in determining whether the home improvement board is ecologically friendly is to pass it through the nose. Take a board and sniff it along the side groove (if it’s furniture, smell the surface as well as the inside of the cabinet door). If it is pungent, it indicates that the formaldehyde emission is relatively high. There is no other option.
Examine the certification and report thoroughly.
If a board material claims to be environmentally friendly, it must have the State Environmental Protection Administration’s green building materials ten-ring certification mark, and wooden furniture must have the Quality Certification Center’s furniture product certification; secondly, the authority must provide the floor and furniture merchants with an inspection report. To remind you, the inspection report must be produced by the store’s quality inspection department, and the furniture must include product instructions.
Level of formaldehyde detection confirmed
There are now three detection methods for formaldehyde emissions: perforation extraction, climatic chamber, and dryer, with the dryer being the most accurate test method that reflects environmental performance. Of course, there is a standard for the board’s formaldehyde emission. The current national standard for wood acceptable for indoor use is E1 level, which means that the formaldehyde emission is 0.5mg/I-1.5mg/I; and the formaldehyde emission is less than 0.5 mg/I. The European norm is E0 level. This wood is currently the most eco-friendly on the market, but it is also the most expensive.
Marine plywood is not completely water proof, but it is highly water-resistant and designed to withstand moisture exposure better than standard plywood. It is specifically engineered for marine and water-related applications where the wood is likely to be exposed to high levels of moisture, humidity, or even occasional submersion in water.
Here’s what you need to know about marine plywood water-resistant properties:
Characteristics of Marine Plywood:
Water-Resistant Glue: Marine plywood water-resistant is manufactured using waterproof adhesive (WBP – Water and Boil Proof) that is designed to withstand exposure to water and moisture. This adhesive helps protect the integrity of the plywood’s layers even when wet.
High-Quality Veneers: Marine plywood typically features high-quality wood veneers that are selected for their minimal defects and knots. This enhances the plywood’s resistance to water damage.
Layered Construction: Marine plywood consists of several layers, or plies, of wood veneer that are bonded together. These layers are cross-laminated, which adds strength and stability and contributes to its ability to resist warping or twisting due to moisture exposure.
Rot Resistance: Marine plywood water-resistant is less prone to rot and fungal growth when compared to standard plywood, thanks to its superior moisture-resistant properties.
Boiling Water Test: Marine plywood is often tested by boiling it in water for several hours to ensure that it maintains its structural integrity and adhesive bond even under extreme moisture conditions.
Common Uses of Marine Plywood:
Boat Building: Marine plywood is extensively used in the construction of boats, yacht interiors, and marine applications. Its water-resistant properties make it suitable for hulls, decks, and other parts of watercraft.
Outdoor Furniture: It is often used to make outdoor furniture due to its ability to withstand exposure to rain, sun, and humidity.
Bathroom and Kitchen Cabinetry: Marine plywood water-resistant is occasionally used for cabinets in high-humidity environments, such as bathrooms and kitchens.
Wet Areas: It can be used for projects in areas with high humidity, such as bathrooms or saunas, although there are specialised waterproof materials that may be preferred in these applications.
Limitations of Marine Plywood:
Not Fully Waterproof: While marine plywood is highly water-resistant, it is not completely waterproof. Extended submersion in water can eventually lead to delamination or swelling, especially if the edges and cut ends are not adequately sealed.
Cost: Marine plywood tends to be more expensive than standard plywood due to its specialized construction and adhesive.
Weight: It is heavier than some other types of plywood due to its dense construction.
In summary, marine plywood is an excellent choice for applications that require resistance to moisture and high humidity, but it should not be mistaken as fully waterproof. Proper sealing of edges and cut ends, along with regular maintenance, is essential to ensure its long-term performance in wet environments. When used correctly and maintained properly, marine plywood can provide a high level of water resistance and durability.
Three-Layer Solid Wood Core: This type of board has a core composed of three layers of solid wood. This core structure contributes to its strength and stability.
Minimal Glue: The use of E0 glue is an excellent choice, as it signifies low formaldehyde emissions, making the board safer for indoor use.
Fully Dried Core Material: The core material undergoes a thorough drying process. Properly dried wood reduces the risk of warping or deformation over time.
Seamless Technology: The application of seamless technology ensures a smooth and consistent surface finish.
Advantages:
Strong and stable: Solid wood cores provide structural strength and stability, making them suitable for load-bearing applications.
High-quality appearance: Seamless technology results in a polished and visually appealing surface.
Durability: Proper drying of core materials reduces the risk of warping or twisting.
Multi-Layer Board:
More Than Three Layers: Multi-layer boards consist of more than three layers of wood veneer or particleboard bonded together with adhesive.
Better Stability: The layered construction enhances stability, reducing the risk of warping or twisting, especially in changing humidity conditions.
Lightweight: Multi-layer boards are lighter in weight compared to solid wood or thick core boards, making them easier to handle and transport.
Impact Resistance: The multiple layers provide additional strength and impact resistance, making multi-layer boards suitable for various applications.
Price Advantage: Multi-layer boards tend to be more cost-effective than solid wood boards, offering good value for the strength and stability they provide.
Frequent Use: Multi-layer boards are widely used in construction, cabinetry, furniture making, and other applications due to their favorable price-to-performance ratio.
In summary, both solid wood thick core boards and multi-layer boards have their unique advantages and are suitable for different purposes. Solid wood thick core boards are known for their structural strength, low formaldehyde emissions, and high-quality appearance. On the other hand, multi-layer boards offer better stability, impact resistance, and cost-effectiveness, making them a popular choice for various projects. The choice between the two depends on your specific requirements, project budget, and desired performance characteristics.
Plywood is a board created by glueing wood splices together. The board’s surface is flat and simple to work with.
Plywood is a three-layer or multi-layer board-like material composed of wood pieces peeled or sliced into veneer and then attached with adhesive. Typically, odd-numbered veneers and neighbouring veneer layers are employed. The fibre directions are perpendicular and bonded together. The sheet product is flat, has a high width-to-thickness ratio, and has a big surface area per unit volume.
What exactly is density board?
In most cases, density board is created by crushing plant fibre and other wood fibre into powder and applying adhesive. The board has a strong nail holding ability and a decent nail holding power. Because of the board’s economic advantage in the market, it has become the contemporary furniture Plates often used in the market.
Density board, also known as fiberboard, is a man-made board composed of wood fibre or other vegetable fibre as the raw material and bonded with acetal resin or other suitable adhesives. During the production process, adhesives and/or additives can be used.
Fiberboard has the advantages of being a homogenous material with a tiny vertical and horizontal strength differential, being resistant to cracking, and having a wide range of applications. The downside of fiberboard is that the back surface has a net pattern, resulting in unequal surface area on both sides of the board.
Due to the difference in expansion force caused by moisture absorption, the board warps and deforms. The surface of the hard board is rough, it is difficult to nail, and it has poor water resistance.
What is the distinction between Mdf and Plywood?
The manufacturing process is distinct.
Plywood is a three-layer or multi-layer board-like material manufactured of wood pieces peeled into veneer or cut into thin wood and then attached with adhesive; density board is used to separate fibres from wood or other plants. The board is formed by interweaving and its own intrinsic bonding material, or by applying adhesive, under the condition of heating or pressure.
Various product categories
Plywood is classified into four types based on its bonding strength: One type of plywood is weather-resistant and can withstand boiling water. This form of plywood is long-lasting, resistant to boiling or steam treatment, and may be used outside; the second type of plywood is water-resistant plywood, which can be immersed in cold water as well as short-term hot water;The third type of plywood is moisture-resistant plywood, which may be immersed in cold water for a short period of time and is acceptable for interior use at room temperature.
The four varieties of plywood are non-moisture-resistant plywood, which is used under normal indoor settings, and moisture-resistant plywood, which is used for furniture and general building. Beech, basswood, ash, birch, elm, poplar, and other general-purpose plywood materials are available. Density boards are classified into three types based on density: low-density boards, medium-density boards, and high-density boards.
Performance and purpose classification
Plywood is mostly utilised in the construction of houses, interior wall decoration, and door panels, among other things. MDF is mostly used for furniture production, building materials, vehicle and ship manufacturing, packaging Materials, and other sectors due to its light weight and strong flexibility on the exterior surface of the shape, such as curved locations. Plywood’s surface is not as smooth and flat as MDF’s. Plywood’s material moisture content is more stable than MDF’s, and plywood has better moisture resistance than MDF, and nail-holding plywood is stronger than MDF.
Distinguishing the quality of plywood is essential to ensure that you choose the right material for your specific project. Plywood quality can vary significantly based on factors like construction, grade, and intended use.
veneer warehouse
plywood warehouse
Through glue
Here are some key factors to consider when evaluating the quality of plywood:
The Quality Of Plywood Grade:Plywood is graded based on the quality of its veneer faces. Common grading standards include A, B, C, and D, with A being the highest quality. There are also specialty grades like “sanded” or “exposure” grades. Understanding the grade helps determine the visual quality of the plywood.
Number of Plies:The number of plies, or layers, in the plywood can impact its strength and stability. More plies generally result in a stronger and more stable panel. For example, 3-ply plywood is less stable than 5-ply or 7-ply plywood.
Veneer Quality:Examine the veneer faces carefully for defects such as knots, voids, gaps, splits, or patches. Higher-quality plywood will have fewer defects on the veneer faces. Knots and defects in the veneer can affect the surface finish and stability of the quality of plywood.
Core Material:The core material between the veneer faces can be made of various types of wood or engineered wood products like MDF or particleboard. The quality of the core can affect the overall strength and stability of the plywood. In some cases, the core may be specifically designed for moisture resistance or other properties.
Thickness:Plywood comes in various thicknesses, and the appropriate thickness depends on your project’s requirements. Thicker plywood is generally stronger and more stable. Ensure that the thickness meets the structural needs of your project.
Glue Type:The adhesive used to bond the veneers together is crucial. High-quality plywood typically uses moisture-resistant or waterproof glue, which enhances its resistance to moisture and prevents delamination. Check the label or product specifications for information on the adhesive used.
Grain Direction:Plywood is made by cross-laminating veneer layers. The grain direction of adjacent layers should be perpendicular to each other for optimal strength and stability. Check the orientation of the grain pattern.
Certifications:Look for industry certifications like FSC (Forest Stewardship Council) or CARB (California Air Resources Board) compliance. These certifications indicate that the plywood meets environmental and safety standards.
Edges and Cuts:Check the edges and cuts of the plywood for smoothness and straightness. High-quality plywood should have clean, straight cuts without splintering or jagged edges.
Weight:Heavier plywood often indicates denser and stronger construction. Compare the weight of different plywood sheets of the same size and thickness to assess relative density.
Price and Brand:While price isn’t the sole indicator of quality, it can be a useful reference point. Recognized brands with a reputation for quality are often a reliable choice.
Intended Use:Consider the intended use of the plywood. For structural applications, you’ll need a stronger, higher-grade plywood, whereas for decorative purposes, a lower-grade plywood with a visually appealing veneer may suffice.
Fancy plywood sheets, also known as decorative plywood or veneered plywood, is a type of plywood that is distinct from traditional plywood due to its unique aesthetic qualities. It is designed and manufactured primarily for its decorative appeal rather than its structural properties. Fancy plywood sheets are created by bonding a thin layer of high-quality decorative wood veneer onto a core panel made of more economical or standard plywood or engineered wood.
Here are some key features and characteristics of fancy plywood sheets:
Decorative Veneer: The distinguishing feature of fancy plywood is its surface veneer, which is made from a wide variety of decorative wood species. These veneers can include oak, cherry, maple, walnut, mahogany, and many others. The veneer is carefully selected for its grain pattern, color, and overall appearance to create visually appealing surfaces.
Aesthetic Variety: Fancy plywood offers an extensive range of aesthetic options. It can mimic the look of expensive hardwoods without the high cost, making it an attractive choice for interior design, cabinetry, and furniture projects.
Versatility: Fancy plywood is highly versatile and can be used in various applications where an attractive, finished surface is desired. It is commonly used for cabinetry, furniture making, wall paneling, interior doors, decorative shelving, and architectural millwork.
Variations: Within the category of fancy plywood, you can find different variations, such as rotary cut, flat cut, or quarter-cut veneers, each with its own unique grain patterns and appearance. The choice of veneer cut can significantly influence the final look of the plywood sheet.
Grades: Fancy plywood is often categorized into different grades based on the quality and appearance of the veneer. Higher-grade fancy plywood sheets will have fewer imperfections, knots, or irregularities in the veneer, making them more suitable for premium applications.
Finish Options:Fancy plywood sheets may come with various finish options, including clear finishes, stains, or lacquers. These finishes enhance the natural beauty of the wood veneer and provide protection against wear and tear.
Cost-Effective Aesthetics: Fancy plywood allows you to achieve the look of high-end, solid wood surfaces at a fraction of the cost. It provides a cost-effective way to incorporate decorative wood elements into your projects.
Ease of Use: Working with fancy plywood is often more straightforward than working with solid wood, as it is available in standard sheet sizes and is less prone to warping or cupping.
Customization: Fancy plywood can be custom-ordered with specific veneer species and grain patterns to suit your design preferences. This customization allows for unique and personalized projects.
Can Water proof Plywood Be Soaked In Water For A Long Time?
Water proof plywood is designed to resist moisture and prevent water from penetrating its core. While it is highly resistant to water damage and can withstand exposure to moisture, it is not intended to be continuously soaked in water for extended periods. Even waterproof plywood has its limitations, and prolonged immersion in water can eventually lead to damage.
Here are some important considerations regarding water proof plywood and water exposure:
Resistance to Moisture: Waterproof plywood is made by applying a waterproofing agent or adhesive to the wood veneers during the manufacturing process. This treatment makes it highly resistant to moisture and water penetration. It can withstand short-term exposure to water, rain, or humidity without significant damage.
Not Fully Immune: While water proof plywood is designed to resist water, it is not completely immune to the effects of prolonged water exposure. Over time, water can seep into the edges and seams of the plywood, potentially leading to delamination, warping, or swelling of the material.
Use in Wet Areas: Water proof plywood is suitable for use in wet areas such as bathrooms, kitchens, and outdoor applications. However, it should still be installed with proper sealing and waterproofing measures to prevent prolonged water exposure.
Avoid Submersion: Waterproof plywood should not be continuously submerged in water. It is not suitable for use in applications where it will be constantly underwater, such as boat hulls or submerged structures. For such applications, marine-grade plywood, which is specifically designed to be fully waterproof, is a more appropriate choice.
Regular Maintenance: To prolong the lifespan of water proof plywood in wet environments, it is essential to perform regular maintenance. This may include sealing edges and seams with appropriate sealants and ensuring that the material remains clean and dry whenever possible.
Follow Manufacturer Recommendations: Always follow the manufacturer’s recommendations and guidelines for the proper installation and maintenance of waterproof plywood to ensure its optimal performance.